Close coupled multi-stage submersible pumps in chrome-nickel stainless steel.
Hydraulic part under the motor and motor cooled by the pumped water for safe operation also with the pump only partially immersed.
Double shaft seal with interposed oil chamber.
The suction strainer prevents the entrance of solids with diameter bigger than: 2mm.

●For water supply from wells, tanks or reservoirs. ●For domestic use, for civil and industrial applications. 
●For garden use and irrigation. Utilization of rain water.

   Operating conditions   
 ●Water temperature up to 35 ℃. ●Minimum internal diameter of well: 132 mm. ●Minimum immersion depth: 100 mm.
 ●Maximum immersion depth: 20 m(with suitable cable length) ●Continuous duty.

●2-pole induction motor  ●MXS : three phase 230 v±10%, 50Hz;   220 v±10%,60Hz;
           three phase 400 v±10%, 50Hz;   380 v±10%,60Hz;
●MXSM: single phase 230 v ±10%, 50HZ;220v±10%,60HZ;  ●Control box with capacitor.and thermal device; Float switch (on demand)
●Cable length :15 m.  ●Insulation class: F  ●Protection class: IP 68

   Special features on request  
●Other voltages.  ●The length of cable is optional